| >>>>>
TH-1100 Sodium Polyacrylate
|
|
Properties: TH-1100 is the homopolymer of low molecular polyacrylic acid and its salts. Free of phosphate, it can be used in situations of low or none content of phosphate. TH-1100 can be used as high effective scale inhibitor for sugar processing. TH-1100 obtains the scale inhibition effect by disp |
| Details
>>> |
|
|
|
| >>>>>
Copolymer of Phosphono and carboxylic Acid (PCA)
|
|
Properties: Through the introduction of phosphonic group into carboxylic group, PCA has good dispersion property for scale of calcium carbonate and calcium phosphate in circulating cool water system. It has good scale inhibition for barium sulfate, strontium sulfate and silica scale. PCA has advanta |
| Details
>>> |
|
|
|
| >>>>>
TH-613 Acrylic-acrylate-sulfosalt copolymers
|
|
Properties: TH-613 is a scale inhibitor and dispersant containing sulfosate and polyelectrolyte. In this copolymer, there exists strong acid, weak acid and non-ion group, it is suitable to be used in high temperature, high pH, high hardness and high alkaline. TH-613 has good scale inhibition for fer |
| Details
>>> |
|
|
|
| >>>>>
Acrylic Acid/Acrylate/Phosphonic Acid/Sulfosalt Te
|
|
Properties: TH-241 is copolymer of carboxylic group, hydroxylic group and sulfonic acid group, it has good scale inhibition performance to calcium phosphate and calcium carbonate. TH-241 has good synergic effects with other agents. TH-241is used as scale inhibitor and dispersant in circulating cool |
| Details
>>> |
|
|
|
| >>>>>
Acrylic Acid-2-Hydroxypropyl Acrylate Copolymer (T
|
|
Properties: T-225 is copolymer of polyacrylic acid and hydroxypropyl acrylate, it has good scale inhibition and dispersion properties to calcium phosphate and calcium carbonate, it has good dispersion properties to ferric oxide sludge, clay and grease. T-225can be used under high pH situation and ha |
| Details
>>> |
|
|
|
| >>>>>
Acrylic Acid-2-Acrylamido-2-Methylpropane Sulfonic
|
|
Properties: AA/AMPS is the copolymer of acrylic acid and 2-acrylanmido-2-methylpropanesulfonic acid (AMPS). Due to including carboxylic group (scale inhibition and dispersion) and sulfonic acid group (strong polarity) in this copolymer, AA/AMPS has high calcium tolerance and good scale inhibition fo |
| Details
>>> |
|
|
|
| >>>>>
Copolymer of Maleic and Acylic Acid (MA/AA)
|
|
Properties: MA/AA is a low molecular weight polyelectrolyte, a copolymer of maleic anhydride and acrylic acid. It has good dispersant performance against carbonate and scale inhibition for phosphate. it has good thermal stability, can be used under high temperature (300℃). MA/AA has good compatibi |
| Details
>>> |
|
|
|
| >>>>>
Hydrolyzed Polymaleic Anhydride (HPMA)
|
|
Properties: HPMA is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330℃. HPMA has obvious threshold effect under high temperature (350℃) and high pH(8.3)level, suitable to |
| Details
>>> |
|
|
|
| >>>>>
Polyacrylic Acid Sodium (PAAS)
|
|
Properties: PAAS is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. PAAS can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS is used as scale inhibition and dispersant fo |
| Details
>>> |
|
|
|
| >>>>>
Polyacrylic Acid (PAA)
|
|
Properties: PAA is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. PAA can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAA is used as scale inhibitor and dispersant for ci |
| Details
>>> |
|
|
|
